Buy an Industrial Thermostat

JUMO thermostats have a tradition of over 50 years and are used worldwide in a wide variety of industries. They are available in electronic and electromechanical versions with a wide range of housing dimensions, technical features, and in various sizes so that they are very flexible to use. Buy an industrial thermostat now or request a quote.

Filter

Displays

Sort by

JUMO heatTHERM P300

3-phase panel-mounted thermostat Basic type: 602090

The 3-phase JUMO heatTHERM P300 can switch outputs up to 480 V at 30 A. All phases are disconnected from the power grid simultaneously here. The device is a safety temperature limiter (STB) and sets the system being monitored to a safe operating status in the event of a malfunction.

Max. switching capacity 30 A, 480 V
Max. capillary length 5000 mm
Max. control range up to 365 °C

Topseller

JUMO heatTHERM-AT and DR

Surface-mounted thermostat Basic type: 603070

The JUMO heatTHERM-DR (design type 7+8) type is a specific variation with a special case bottom section for DIN rail or wall mounting. As a result, easy installation on mounting rails TH35 according to DIN EN 60715 (e.g. in control cabinets) is possible.

"Push-In®" terminal technology
Surface-mounted thermostat or DIN-rail thermostat
Max. control range up to 350 °C

JUMO heatTHERM

Panel-mounted thermostat Basic type: 602031

The product is available as temperature controller (TR), temperature monitor (TW) (type 602030), safety temperature monitor (STW), or as a safety temperature limiter (STB) (type 602031). The panel-mounted thermostat is RoHS-compliant and cadmium-free.

Max. switching capacity 16 A, 230 V
Max. capillary: 5000 mm
Control range: up to 350 °C

Topseller

Surface-mounted single thermostats

ATH series Basic type: 603021

The devices of the ATH series are available as temperature controllers (TR), temperature limiters (TB), temperature monitors (TW), safety temperature monitors (STW), and safety temperature limiters (STB). In the event of a malfunction the STB sets the system being monitored to a safe operating status.

Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C

Topseller

Panel-mounted thermostat

EM series to 500 °C Basic type: 602021

The devices of the EM series are available as temperature controllers (TR), temperature monitors (TW), temperature limiters (TB), safety temperature monitors (STW), and safety temperature limiters (STB). In the event of a malfunction the STB places the system being monitored in a safe operating status.

Material: stainless steel/copper
Max. capillary: 5000 mm
Control range: up to 300 °C

JUMO heatTHERM P100

Panel-mounted thermostat Basic type: 602051

The JUMO heatTHERM P100 has been designed as a temperature controller (TR) for the entry-level class. The device stands out through its solid quality, simple installation, and low space requirement.

Material: copper
Max. capillary: 2000 mm
Control range: 30 to 120 °C

New product

JUMO miroTRON

Electronic thermostat with optional PID two-state controller function Basic type: 701080

The JUMO miroTRON is a digital electronic thermostat for simple temperature control with optional PID two-point controller function and measurement inputs for RTD temperature probes or thermocouples and standard signals.

Service and operating hours counter
Process information via message texts
Quick configuration via USB

New product

JUMO miroTRON

Electronic thermostat with optional PID two-state controller function Basic type: 701090

The JUMO miroTRON is a digital electronic thermostat for simple temperature control with optional PID two-point controller function and measurement input for RTD temperature probes. In the 60 mm and 80 mm round installation format, the JUMO miroTRON offers an alternative solution for mechanical dial thermometers or contact dial thermometers.

Service and operating hours counter
Process information via message texts
Quick configuration via USB

Panel-mounted thermostats

ETH series Basic type: 602010

Panel-mounted thermostats from the ETH series monitor thermal processes. The devices are available as safety temperature monitors (STW) and safety temperature limiters (STB). In the event of a malfunction the STB places the system being monitored in a safe operating status.

Material: stainless steel/copper
Max. capillary: 5000 mm
Limit value range: 50 to 300 °C

Panel-mounted thermostats

EM series up to 650 °C Basic type: 602025

The devices are available as temperature monitors (TW), temperature limiters (TB), and as safety temperature limiters (STB). In the event of a malfunction the STB places the system being monitored in a safe operating status. Panel-mounted thermostats operate according to the liquid expansion principle.

Material: stainless steel
Max. capillary: 3000 mm
Control range: up to 650 °C

JUMO frostTHERM-AT/-DR

Frost protection thermostat Basic type: 604100

The product monitors the temperature in ventilation and air-conditioning systems. It has a small switching differential and a high level of reproducibility. The AT version allows mounting on the wall; the DR version is suitable for DIN-rail mounting.

Max. probe line length 12000 mm
Control range: -10 to +15 °C
Protection type (AT) up to IP65

Surface-mounted thermostats

AMTHF series Basic type: 603051

The devices of AMTHF series are available with 2, 3, or 4 switching steps as temperature controllers (TR) and temperature monitors (TW). The sequence contact gap of the individual switching steps in Kelvin is adjusted in a fixed manner according to customer requirements per default.

Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 50 to 300 °C

Surface-mounted thermostats

ATH.-SE series Basic type: 603031

The devices of the ATH.-SE series are available as temperature monitors (TW), safety temperature monitors (STW), and safety temperature limiters (STB). In the event of a malfunction the STB places the system being monitored in a safe operating status.

Max. control range: 50 to 300 °C
Material: stainless steel/copper
Max. capillary: 2000 mm

JUMO exTHERM-AT

Explosion-protected surface-mounted thermostat Basic type: 605055

The product monitors and controls temperature in potentially explosive areas. Use in environments with gas and steam is permitted (zones 1 and 2); use in environments with conductive dust (zones 21 and 22) is also permitted.

Max. switching capacity: 25 A
Protection type IP66
Max. control range: 20 to 500 °C

Surface-mounted single thermostat or surface-mounted double thermostat

ATH-SW series Basic type: 603035

Surface-mounted thermostats of the ATH-SW type series consist of 1 or 2 separate measuring and switching systems. The devices are available as temperature monitors (TW), safety temperature monitors (STW), and safety temperature limiters (STB).

Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C

JUMO eTRON M100

Electronic cooling controller Basic type: 701061

The JUMO eTRON M100 is an electronic cooling controller for use in cold-storage rooms, display refrigerators, or refrigerating counters to be connected to RTD temperature probes. The first measurement input acquires the temperature of the cold-storage room. The second measurement input acquires the temperature of the vaporizer.

Pt100 two-wire, Pt1000 two-wire, KTY2X-6
DIN EN 12830 and DIN EN 13485
HACCP-compliant recording

JUMO eTRON M100

Electronic 2-channel microstat Basic type: 701066

The product is an electronic 2-channel microstat for universal use to be connected to RTD temperature probes. The 2 measurement inputs acquire temperatures that are available as the actual value and that can be assigned to the relays as the user sees fit.

RS485 interface
Pt100, Pt1000, KTY1X-6/KTY2X-6
DIN EN 12830 and DIN EN 13485

Surface-mounted double thermostat

ATH series Basic type: 603026

Surface-mounted double thermostats of the ATH series consist of 2 separate measuring and switching systems. The devices are available as temperature controllers (TR), temperature limiters (TB), temperature monitors (TW), safety temperature monitors (STW), and safety temperature limiters (STB).

Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C

Panel-mounted thermostat

EM series Basic type: 602026

The devices are available as safety temperature monitors (STW) and safety temperature limiters (STB). In the event of a malfunction the STB places the system being monitored in a safe operating status. Panel-mounted thermostats operate according to the liquid expansion principle.

Material: stainless steel
Max. capillary: 5000 mm
Control range: up to 300 °C

Sale

JUMO eTRON T100

Electronic thermostat with optional PID two-state controller function Basic type: 701052

The electronic thermostat for DIN rail mounting has been especially developed for temperature control and monitoring. RTD temperature probes, thermocouples, current signals, and special temperature probes that are used in railroad technology can be connected to the measurement input. The intuitively operated device is optionally available as a PID two-state controller.

Relay (changeover contact 10 A), PhotoMOS® relay
Pt100, Pt1000, KTY2X-6
Thermocouple type J, L, and K

Hot air thermostats

WTHc series Basic type: 604514

The thermostats of the WTHc series are suitable for use in hot air systems according to DIN 4794 and consist of 3 separate measuring and switching systems with the following functions: temperature controller (TR), temperature monitor (TW), and safety temperature limiter (STB).

Max. capillary: 1250 mm
Max. control range: 20 to 80 °C
Protection type IP40 or IP54

Exhaust gas temperature monitor

Type STM-RW-2 Basic type: 601540

The exhaust gas temperature monitor is used to monitor the exhaust gas temperature released from solid fuel boilers when in bivalent operation with oil-fired boilers. Another application is the locking of ventilation systems that cause vacuums in combination with tiled stoves and chimneys.

AC 230 V +10 %
Protection tube: 15 × 150 mm, steel
Limit value range: 40 to 120 °C

JUMO frostTHERM-ATE

Electronic frost protection thermostat Basic type: 604170

The frost protection thermostat is used on the air part of air-conditioning systems, heat exchangers, heating registers, and similar units to protect them against frost damage and freezing. Applications include in building automation and the ventilation and air-conditioning industry.

Max. probe line length 6000 m
Control range: 1 to 10 °C
Protection type IP42

ATEX thermowells

For zone separation 0/1 or 20/21 Basic type: 605057

ATEX thermowells made of stainless steel are used for the separation of zones 0 and 1 or 20 and 21. Screw-in sleeves or weld-in sleeves are available from stock in insertion lengths 100 mm, 150 mm, 200 mm, and 300 mm.

Max. pressure: 54 bar/36 bar
Max. insertion length 300 mm
Max. temp.: 400 °C

Technical features at a glance

Mechanical thermostats

Control and monitoring of temperatures of up to 650 °C without auxiliary energy

Housing versions for wall mounting and for mounting behind a panel

Very robust systems for mechanical loads and EMC interference

Versions as safety devices (STB and STW) according to DIN EN 14597

Variants for placement in the Ex area

OEM version available

Electronic thermostats

Connection of RTD temperature probes and thermocouples
Temperature control by activating a heating/cooling system via binary output
Adaptation to the application via the device front and a configuration program
Different formats for installation in a front panel and version for mounting on a C-rail
Version as cooling controller (with defrosting function) and many additional functions
OEM version available

Buy an industrial thermostat

The most important background information

What does a temperature switch do?

Temperature switches are designed for controlling and monitoring temperatures in various systems and applications. They switch an electrical contact when the temperature exceeds or falls below a certain level, thereby preventing overheating or ensuring sufficient heating.

jumo > web > services > faq

What does a temperature switch do? – JUMO-FAQ

What is the difference between a temperature switch and a temperature controller?

A very precise control result is achieved with temperature controllers. These measure the temperature with a temperature sensor and, as PID controllers, they regulate the temperature exactly to the setpoint value. In the case of binary control, precise adjustment is possible by changing the relative switch-on time of the actuator. For example, the heat output can be varied from 0 to 10 kW.

In contrast, temperature switches are assigned to the discontinuous two-state controllers – the process temperature fluctuates with them around the setpoint value. In many applications, such temperature fluctuations are acceptable, so that temperature switches can be used to set up very robust temperature control at low cost.

jumo > web > services > faq

What is the difference between a temperature switch and a temperature controller? – JUMO-FAQ

How do bimetal temperature switches work?

As the name suggests, a bimetal is used in bimetal switches. The 2 metals that are rolled onto each other (e.g. copper and nickel) have different expansion coefficients. As the temperature rises, the metals expand to different degrees so that a deflection occurs and a contact is opened (NC) or closed (NO).

Bimetal switches in industrial environments have a very compact design and are usually screwed into the process like a sensor. Their switching point is fixed during production. They are also very resistant to vibration – a vibration resistance of up to 10 g is not uncommon. The switches are connected in the direction of the evaluation system via a connection line. Temperature switches with a bimetal are used in such devices as compressors – they switch off the compressor in the event of excess temperature or start active cooling (e.g. fan).

jumo > web > services > faq

How do bimetal temperature switches work? – JUMO-FAQ

How do gas or liquid-filled temperature switches work?

This type of temperature switch is usually referred to as a thermostat and consists of a probe filled with a gas or liquid that is placed in the process. If the temperature at the probe rises, the system pressure increases. Because the membrane is connected to the sensor via the capillary line, the same pressure is created in it. The membrane expands and a snap-action switch is triggered. The inner diameter of the capillary line with 0.2 mm is just twice the diameter of a human hair (up to 0.1 mm).

The probe and the thermostat housing are connected to each other via the capillary line. Maximum capillary line lengths of up to 5 m can be regarded as practical. The switching point can usually be set on the housing.

jumo > web > services > faq

How do gas or liquid-filled temperature switches work? – JUMO-FAQ