Controllers for level

Reliable level control is essential in many areas. JUMO offers level controllers that are suitable for your applications. You can choose from a wide variety of different electronic controllers ranging from compact controllers to automation systems. These include one-channel, multichannel, program, ratio, cascade, and continuous controllers.

  • Product selection guide

Controller

Filter
1
Hits: 11
Topseller
JUMO AQUIS touch P - Modular multichannel measuring device (liquid analysis)

JUMO AQUIS touch P
Modular multichannel measuring device (liquid analysis) Basic type: 202580
The product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate.
  • Panel built-in device
  • 2 analysis sensors and 15 measuring signals
  • P, PI, PD, and PID behavior
Topseller
JUMO AQUIS touch S - Modular multichannel measuring device (liquid analysis)

JUMO AQUIS touch S
Modular multichannel measuring device (liquid analysis) Basic type: 202581
The product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate.
  • Wall-surface-mounted housing
  • 4 analysis sensors and 21 measuring signals
  • P, PI, PD, and PID behavior
Topseller
JUMO diraTRON - Compact controller

JUMO diraTRON
Compact controller Basic type: 702110
Universally-applicable devices in 5 DIN formats for controlling process variables. The basic type includes autotuning, a ramp function, a program controller, manual mode, limit value monitoring functions, digital control signals, extensive timer functions, and a service counter.
  • 1 control channel
  • Display of individual texts
  • Service counter
Topseller
JUMO DICON touch - Two-Channel/Four-Channel Process and Program Controller

JUMO DICON touch
Two-Channel/Four-Channel Process and Program Controller Basic type: 703571
DICON touch can be used to perform complex control and management tasks. The plant can be visualized and operated via freely-definable process screens. The device has a modular design and can therefore be adapted to the individual plant.
  • Cascade control
  • Modbus master TCP/RTU
  • Up to 4 analog inputs
New product
JUMO meroTRON - Modular one-channel/two-channel controller with PLC function

JUMO meroTRON
Modular one-channel/two-channel controller with PLC function Basic type: 703051
The multifunctional controller impresses with the individual design of its user interface and hardware equipment. This way, analog as well as digital inputs and outputs, counting inputs, and interfaces can be added as required. The controller masters even complex applications with a second control channel, math and logic functions, and the implementation of control functions via ST code.
  • Program controller with real-time start
  • Modbus master (RTU/TCP)
  • Data logger
New product
JUMO miroTRON - Electronic thermostat with optional PID two-state controller function

JUMO miroTRON
Electronic thermostat with optional PID two-state controller function Basic type: 701080
The JUMO miroTRON is a digital electronic thermostat for simple temperature control with optional PID two-point controller function and measurement inputs for RTD temperature probes or thermocouples and standard signals.
  • Service and operating hours counter
  • Process information via message texts
  • Quick configuration via USB
JUMO Quantrol - Compact controller

JUMO Quantrol
Compact controller Basic type: 702030
The Quantrol series is available in three DIN formats. It is used for two-state and three-state control applications as well as for the control of regulating valves or thyristor power controllers via a continuous output. Configuration is carried out on the device front or using the setup program.
  • 48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
  • RS485 interface (Modbus-RTU)
  • Two-state/three-state/continuous controller
JUMO iTRON DR 100 - Compact controller

JUMO iTRON DR 100
Compact controller Basic type: 702060
The JUMO iTRON DR 100 is a universal, user programmable microprocessor controller suitable for a large number of technical control applications. As an option, the controller is available with 1 relay (changeover contact) or 2 relays (normally open contacts).
  • Mounting on DIN rail, 35 mm
  • Two-state/three-state controller
  • Design width 22.5 mm
JUMO AQUIS 500 AS - Indicating device and controller for standard signals

JUMO AQUIS 500 AS
Indicating device and controller for standard signals Basic type: 202568
The product controls sensors that output a standard signal (e.g. chlorine). The graphic display enables the display of the standard signals as digits or a bar graph. 2 relay changeover contacts implement switching and alarm functions as well as control tasks with P, PI, PD, and PID behavior.
  • Standard signals 0 to 20 mA; 0 to 10 V
  • LCD graphic display
  • Wall-surface-mounted housing
Discontinued model
JUMO IMAGO 500 - Multichannel process and program controller

JUMO IMAGO 500
Multichannel process and program controller Basic type: 703590
The JUMO IMAGO 500 is a process and program controller with up to 8 controller channels or 4 program channels. The user interface masks can be adapted according to individual preferences. 2 screen masks allow user-specific placement of text, process values, background images, and icons
  • Up to 8 control channels and 4 program channels
  • Up to 4 cascade controllers
  • 50 programs with 100 sections
Discontinued model
JUMO dTRON 304/308/316 - Compact controller with program function

JUMO dTRON 304/308/316
Compact controller with program function Basic type: 703041
The controller series comprises 4 user programmable devices in various DIN formats to control temperatures, pressures, and other process variables.
  • 4 limit value monitoring functions
  • Inputs/outputs can be expanded
  • Formats: 48 × 48 – 96 × 96 mm

item items, maximum number of items reached

We are at your service

We are at your service

We'll be happy to help – whether you have a technical concern, need to schedule an appointment, request a quote, or inquire about a price.
Contact us